Airmar

$2.01 Off

$32.99

~~$35.00~~

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be...

$3.51 Off Sold Out

Airmar 11-Pin Low-Frequency Mix Match Cable f/Raymarine [MMC-11R-LDB]

$123.99

~~$127.50~~

11-Pin Low-Frequency Mix & Match Cable for RaymarineSome CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, pl...

$0.11 Off

Airmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]

$31.99

~~$32.10~~

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

$2.01 Off Sold Out

Airmar 117WR-2 Transducer Hull Nut Wrench [117WR-2]

$42.99

~~$45.00~~

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.Fo...

Airmar 117WR-3 Double Handle Transducer Wrench [117WR-3]

$53.73

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nu...

$3.01 Off Sold Out

Airmar 117WR-4 Transducer Housing Wrench [117WR-4]

$31.99

~~$35.00~~

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bro...

$8.01 Off

Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]

$41.99

~~$50.00~~

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

$14.01 Off

Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]

$53.99

~~$68.00~~

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use wi...

$15.01 Off

Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]

$68.99

~~$84.00~~

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nu...

$3.01 Off Sold Out

Airmar 175WR-4 Transducer Housing Wrench [175WR-4]

$35.99

~~$39.00~~

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench...

$3.01 Off

Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]

$31.99

~~$35.00~~

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

$2.01 Off

Airmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]

$42.99

~~$45.00~~

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For...

$2.01 Off

Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]

$53.99

~~$56.00~~

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut...

$2.01 Off

Airmar 60WR-4 Transducer Housing Wrench [60WR-4]

$33.99

~~$36.00~~

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 6...

$2.01 Off

Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]

$33.99

~~$36.00~~

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

$2.01 Off

Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]

$43.99

~~$46.00~~

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For us...

$2.01 Off

Airmar 75WR-3 Double Handle Transducer Wrench [75WR-3]

$53.99

~~$56.00~~

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut...

$1.01 Off Sold Out

Airmar 75WR-4 Transducer Housing Wrench [75WR-4]

$35.99

~~$37.00~~

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench...

$9.51 Off Sold Out

Airmar B117 Bronze 0 Depth Temp w/Ray Connector f/CP370 DSM300 [B117-DT-RAY]

$312.99

~~$322.50~~

B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design ...

$9.51 Off Sold Out

Airmar B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin [B117-DT-HB]

$312.99

~~$322.50~~

B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-PinThe B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes dr...

$82.01 Off Sold Out

Airmar B164 Bronze Thru-Hull Transducer w/Humminbird - 14-Pin Plug - 12 [B164-12-14HB]

$1,192.99

~~$1,275.00~~

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 12°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mo...

$82.01 Off Sold Out

Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0 [B164-0-HB]

$1,192.99

~~$1,275.00~~

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush...

$82.01 Off Sold Out

Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12 [B164-12-HB]

$1,192.99

~~$1,275.00~~

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, fl...

$82.01 Off Sold Out

Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20 [B164-20-HB]

$1,192.99

~~$1,275.00~~

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flus...

$73.51 Off Sold Out

Airmar B175H Bronze Thru Hull 12 Tilt - 1kW - Requires Mix and Match Cable [B175C-12-H-MM]

$1,073.99

~~$1,147.50~~

B175H Bronze Thru Hull 12° Tilt - 1kWRequires Mix and Match CableB175H Bronze Thru Hull 20 degree Tilt 1KWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’...